IGT S-Plus No Keys

[Dtabes]

Hi there all have these slots in our home with no keys. How do I go about getting locks off for replacement or just out?

Doug

[Stayouttadabunker]

Well Doug,
The white one has a key in it? 
Did you lose it?

They sell a special lock tool on the internet but an electric grinder will work if you're handy.
Carefully grind off the face of the lock and punch out the middle with a large centering punch and hammer.
Once opened, you can remove the barrel nut and throw the lock away.
Later, with the door open, you will be able to remove the cam and lock that is slightly below the main door lock you've cut up, for the belly door.
You won't need to grind that off.

[Dtabes]

Hi there that key is bent and stuck in there so I am guessing someone tried to use the wrong key... It does not turn at all

Doug

[RB]

Are you positive the belly door is locked? I see the lock installed but it's possible that it does not have a cam on it. Sometimes people just stick one in to fill the hole.

[a69mopar]

The door latch knob is half way up. May open with a little lift on the door as you lift the latch knob.

[ok2bnvus2]

i had the same problem but i drilled mine out lock metal seemed to be very soft

[Stayouttadabunker]

3 days later.....and this machine IS STILL LOCKED?? 
You guys would top the list of the worst crooks ever!! 

[ok2bnvus2]

the locks look like they have a larger enough ridge to get channel locks on even though they are locked try turning the lock cylinders clock wise or counter clock wise if the locking nut on it isnt  super tight it should spin the 1/4 turn you need to open the door then you can take the nut off and replace lock