Aristocrat Helix Gen8 CPU

[Danter32]

Hello, this is my first posting on any forum let alone this one so please forgive me for any errors made in this post lol.(I don't know how to write a post.)
--I've recently bought a Helix GT Gen8 CPU for my Wonder 4 Casino Game by Aristocrat and I just wanted to inquire about CPU Error Codes on the Display aboard the CPU. Example, my board says FC whenever it's booted up. I have no clue as to what this means as I'm still relatively new to slots in general and I can't find a manual around to reference it to.
Anything is appreciated immensely!

[jakah440]

Here is what I show.

These need to have an Aristocrat video card that is correct for the game and BIOS. The video card needs to have Atristocrat firmware on it.

[Danter32]

Here is what I show.

These need to have an Aristocrat video card that is correct for the game and BIOS. The video card needs to have Atristocrat firmware on it.

Thanks jakah! Come to find out that the replacement board I bought didn't come with a configuration stick! Went ahead and made sure the stick from the old board is compatible with the new board assembly before robbing it off of the old board. My game fired right up.
 Side Note: You mind pointing me in the direction to where I can acquire the documentation for those codes?

[jakah440]

Here is what I show.

These need to have an Aristocrat video card that is correct for the game and BIOS. The video card needs to have Atristocrat firmware on it.

Thanks jakah! Come to find out that the replacement board I bought didn't come with a configuration stick! Went ahead and made sure the stick from the old board is compatible with the new board assembly before robbing it off of the old board. My game fired right up.
 Side Note: You mind pointing me in the direction to where I can acquire the documentation for those codes?

PM me your email
Thanks, Justin

[Danter32]

Here is what I show.

These need to have an Aristocrat video card that is correct for the game and BIOS. The video card needs to have Atristocrat firmware on it.

Thanks jakah! Come to find out that the replacement board I bought didn't come with a configuration stick! Went ahead and made sure the stick from the old board is compatible with the new board assembly before robbing it off of the old board. My game fired right up.
 Side Note: You mind pointing me in the direction to where I can acquire the documentation for those codes?

PM me your email
Thanks, Justin

Hey Justin, I can't quite send PM's yet as I'm still new to this website, but if I may ask you to send it to this email that would be perfect!
danteratliff@gmail.com. Thanks!
  -Dante.

[jakah440]

Sent and you should now be able to PM. You got to the three post requirement.

Thanks, Justin

[LKI]

My board was show 15 .
Could I ask for a copy too? Thank you in advance
loukiniek@gmail.com

[jakah440]

I don't show a 15 as an error code.  What Aristocrat machine do you have?

[LKI]

Hello sir ,

Helix upright , PCA 494900