Greetings,
After much reading there isn’t a difinitive “how to” on swapping std to mld screens I’ve found. Would be a great post if there was!
It all seems to be about mounting.
I have a G23, no issues. Brain box has 4gb, 4690 dual dvi card, and SSD.
Pic of my std monitor installed, KTL230S-06
Second pic is the mld monitor KTL220MD-04
I have the 440w PSU.
I didn’t see anything else required to swap. Only lots of discussion about mounting.
Can anyone chime in on whether this new mld will fit the existing monitor mount as it’s a larger std screen, and I’ve read the mld is an inch smaller physically as it apparently has a little more components on the edges. Thus its a 22in. Even if it takes a little modding, would it swap?
If not, any comments on what’s needed to mount the mld screen in my cabinet?
Thanks for any info. Would really help clarifying if it needs anything else to do an mld swap.