Denomination chip gal02

[John jackson]

I have a sigma treasure wheel and I it's stuck in self testing mode and I have the denomination chip that has gal02 on it . It's not the gal01. Do I need ram clear chips . I have read posts on my about my sigma 150 b slot machine and  I have tried the reset process and I get the same result goes right into self testing mode and that's it it stays there

[Mr. Dinoman]

yes if you have a GAL2 chip then you need a special RAM clear chip...Hard to find...Try finding a different GAL chip if possible...

[John jackson]

I have the gal 01 chip in it now , I am still stuck

[Badbaud]

The only way I was able to clear the two 5101 RAM chips is to remove power to the board and get a piece of tin foil and short it across all of the legs on both RAM chips at the same time for about 30 seconds.

[John jackson]

Ok I did that and and when I turned machine on one reel spun backwards and  and a money sign was displayed on the information center so I let it sit and it did nothing else for a minute then went right back into self testing mode and It sat there for hours displaying that . So I turned my machine off then back on and now the reels dont spin and it eont go into the. Self test mode and there's a dash that is displayed on the info screen , my led  soft meters don't register or come on at all , did  I just mess my Board up ?

[John jackson]

I'm going to try again and see if i can get it to boot up

[John jackson]

This is just a thought I was thinking my vfd works nut the led meters isnt , that might be the main problem bexcause if it dont work then I cant get into the settings so would that cause my machine to just get stuck. In test mode  because it wouldn't show any  errors or anything because it can't if it's not working .