Bally S6000 83f0 error after installing new battery.

[ChickenDave]

New to the group and slot collecting. Obtained a Bally S6000 Blazing 7's that needed a new battery. Installed 3.6 volt battery. But now I get a 83f0 error. I understand that I need to clear the RAM but unsure what set of clear chips I need since my chips don't have numbers other than U43PRINTER U28PRINTER. See picture. MPU is 1997 there is also a Bally sticker 2003. This machine has a printer. Please direct us in the right direction.

[shortrackskater]

 

I'm sure you'll get a response soon, but for starters - put 83f0 in the search box for this forum and you'll get plenty of information to get you going. 

[Sunrise Side]

Yes you will need a ser of clear chips. NLG member RB  Ronald Ball I believe has them. Send him a PM or post in the classfieds WTB

[rogue]

You can use Leave-in Mains, all you have to do is switch DS1 dip 8 to on position to clear ram, back to off for normal operation.

[Sunrise Side]

You can also use a remote battery holder of 3 - AA Alkaline batteries, change the batteries with power on, change batteries annually and you won't need to do a clear.