S2000 progressive meter not working

[slots-4-u]

Didn't do one of these for some time. It should be linked in setup.

SORRY, DID NOT REALIZE YOU HAD A CHAMII. On that one you set it on cham II board.

[Ken]

See if this will help some .. still has to have percentage and a base amount set ... maybe other things too just don't remember

7.3                   Progressive
7.3.1            Controller Select
7.3.1.1      Game 1
7.3.1.2      25¢ if that is your denomination
Game 1: Demon 25¢: Level 1
       Stand Alone: Disabled
       None:            Disabled
       SAS:              Disabled
       Link:              Level 1
 
7.3.2          Progressive Display Set up
             None or Video Display
 
7.3.3          Stand Alone Set up
 
7.3.4          SAS Progressive Group
 
SAS       Progressive Group +000

[ilovekittens]

That helped, but I looks like I may need my hand held the whole way.  Adjusted settings as described by Ohio Gaming allowed me to set the 4 settings in progressive stand alone.  Now that that is done what would be the next step because I'm still getting the no data across the spectrum.  Thanks.  ILK

[therockinelvis]

I remember having to set about 25 things. Took quite a while. I will search my notes Sunday. I remember they didn't help me much. A member from Mass I think talked me through it by phone. And it would not hurt to try a 4.3 Auto Configure Netplex Device after you plug it in so the machine sees it before you go into setups

[ilovekittens]

That's all I needed to do was the 4.3 Auto config.  She's up and running now.  I now have progressive.  Thanks for all the help guys.  ILK