Author Topic: gamemaker error (Read 15025 times)

brooker · « **Reply #20 on:** March 20, 2015, 10:05:11 AM »

ok here is the pic. i cant change Jurisdiction 1 for 5. i do safe ram up 7,8 swinf,,, how look the optical part in the machine.. which part is

shortrackskater · « **Reply #21 on:** March 20, 2015, 11:02:08 AM »

Quote from: brooker on March 19, 2015, 12:17:14 PM

well the error dissapear.. but now i get coin stuck in the base plastic of optic. check the pic

If your coin is stuck (looks like a token?), you should first check to see if the comparator is snapped all the way in to the plastic clips and then make sure the coin optics assembly is screwed in firmly. All this stuff can come loose and cause all sorts of coin drop issues.

brooker · « **Reply #22 on:** March 20, 2015, 12:01:59 PM »

ok thank.,,,now is closed door error

brooker · « **Reply #23 on:** March 22, 2015, 09:35:17 AM »

after 2 day. i turn on the machine. the machine star to play. but after 2 minute door open error again...

shortrackskater · « **Reply #24 on:** March 22, 2015, 10:32:41 AM »

Quote from: brooker on March 20, 2015, 12:01:59 PM

ok thank.,,,now is closed door error

I've never heard of a closed door error.
Are you reading any of these suggestions?
Did you check to make sure your coin comparator is seated in and that the coin optics board below it is screwed in?

brooker · « **Reply #25 on:** March 22, 2015, 05:28:55 PM »

is door open error....maybe a clear debug can fix this

shortrackskater · « **Reply #26 on:** March 22, 2015, 08:05:59 PM »

I give up!

You refuse to answer any questions and then you suggest new solutions...
I can't help anymore. Good luck.

brooker · « **Reply #27 on:** March 22, 2015, 08:19:08 PM »

sorry..my english is no very well...i try to explain better i can.......the coin compatarator and optict board is ok...i did all suggestion post here.. i need help with this...and sorry again

CVslots · « **Reply #28 on:** March 22, 2015, 08:38:42 PM »

Post pictures of door open error...thank you! And it's ok, the English thing, we can handle it, but we need answers when we ask questions. Otherwise, we cannot help.

brooker · « **Reply #29 on:** March 22, 2015, 08:49:56 PM »

ok check the pic. if you need more. let me know

CVslots · « **Reply #30 on:** March 22, 2015, 08:54:26 PM »

Ok good! The machine believes a door is open, whether it appears to be open or not. All we care about is making the machine happy! You need to look inside the belly (bottom glass) door and see what you can find. There should be some type of optics/sensor/switch, that will tell the machine the door is closed. I know many optics are bypassed, but to be honest, I have never had to bypass a belly door on a Bally. Check it out and let us know what you find.

brooker · « **Reply #31 on:** March 22, 2015, 09:07:37 PM »

for see inside the belly. i need remove all part from the door?

CVslots · « **Reply #32 on:** March 22, 2015, 09:38:06 PM »

No, no...there is a latch....should be a lever/button outside on frame...push/pull latch...and door will drop down in your lap.

shortrackskater · « **Reply #33 on:** March 22, 2015, 09:53:45 PM »

There's no latch for that belly door... to access that area, you go through the inside of the main door.
BUT... is there a small door on the right of your machine? It's very important the latch on that is in the proper position for it to register as closed.

brooker · « **Reply #34 on:** March 22, 2015, 10:21:36 PM »

i check the belly. but i not see any thing... check this pic

CVslots · « **Reply #35 on:** March 23, 2015, 07:41:10 AM »

Brooker, please read the attacked post from beginning to end, and i believe you will find your solution. Another member had the same EXACT issue you are having....

http://newlifegames.com/nlg/index.php?topic=76.msg422#msg422

brooker · « **Reply #36 on:** March 23, 2015, 02:52:57 PM »

ok. how i do this...............

. First thing I do when I get a gamemaker upright is reach in and pull out the harness to drop door, isolate orange wire, connect gray and yellow wire together. -that problem never happens again.

brooker · « **Reply #37 on:** March 23, 2015, 06:26:16 PM »

i get the manual. and i think the machine dont have the optical install. what i can do in this case

brooker · « **Reply #38 on:** March 23, 2015, 07:24:47 PM »

well i disconect yellow wire and the machine work hehehehee

rokgpsman · « **Reply #39 on:** March 23, 2015, 08:39:04 PM »

Was the yellow wire causing the door open error?

(I've been trying to keep up on this saga but it's been tough for me)

News:

NLG Site Navigation Menu

Author Topic: gamemaker error (Read 15025 times)