Very nice!
That would mean that I would have one less "mule" for testing.
So you just joined the harnesses together and your getting no adverse interaction from the opposite motherboard when in operation?
How did you handle the ribbon cable from the power distribution box?
Rich
Thank you! Yes, basically all the molex connectors are just split with a home-made Y splitter. The machine doesn’t act any differently with the second motherboard connected.
I made my own ribbon cable. I bought a few feet of 26 wire ribbon cable and the appropriate connectors and then added a connector on each end and one in the middle for the power distribution box. They’re actually quite easy to make. The connectors just press on. I used a vice for even pressure.