Author Topic: gamemaker error (Read 14720 times)

brooker · « **on:** March 16, 2015, 12:52:50 PM »

what mean this error

CVslots · « **Reply #1 on:** March 16, 2015, 10:19:36 PM »

Well, you have 4 errors on the screen....we cannot tell you how to fix ALL of them, if you are not prepared to tell us how they happened (I.e. how/when these errors appeared, the machine history, what you have done to fix)

?

Need more info to help....

brooker · « **Reply #2 on:** March 17, 2015, 07:51:58 AM »

ok thank....i bougth the machine in not work condition. first i check the power supply and was ok.i change the battery. i did ram clear. but the machine up with this error.. i have other used comparator. i test and is the same.

CVslots · « **Reply #3 on:** March 17, 2015, 09:50:33 AM »

What is the coin handling equipment in the machine? Does it in fact a Comparitor? And show us the screen in the set-up where you have set the coin equipment options.

brooker · « **Reply #4 on:** March 19, 2015, 12:17:14 PM »

well the error dissapear.. but now i get coin stuck in the base plastic of optic. check the pic

brooker · « **Reply #5 on:** March 19, 2015, 12:45:46 PM »

ok now i just have this in the screen. check the pic..

CVslots · « **Reply #6 on:** March 19, 2015, 01:35:35 PM »

That's indicating a door is open. Check all the lower doors, including the cash can door.

erbs · « **Reply #7 on:** March 19, 2015, 04:51:10 PM »

I have had that door open error before. Its been years ago but if I remember correct you will have to go into your settings. Under door type option you will see mechanical or pulse optics. I'm not sure witch one you need to set it for. See what you have it on now and set it for the other one. That took care of the problem for me. I cant remember if you need a clear chip to make the change.

brooker · « **Reply #8 on:** March 19, 2015, 05:02:49 PM »

but what choice mechanical or pulse...i think is mechanical now

erbs · « **Reply #9 on:** March 19, 2015, 05:21:08 PM »

If mechanical go to the other one. I'm pretty sure you may need to clear to change that.

brooker · « **Reply #10 on:** March 19, 2015, 05:35:30 PM »

i change for optical and the same....

brooker · « **Reply #11 on:** March 19, 2015, 06:36:54 PM »

i try with no detecte door... but i cant setting.. is possible do that. i mean cancel the opcion the open door

erbs · « **Reply #12 on:** March 19, 2015, 06:43:32 PM »

Hopefully someone else will chime in with more knowledge than me. You may have to use a clear chip. As mentioned its been years since I had that problem.

brooker · « **Reply #13 on:** March 19, 2015, 07:01:12 PM »

i ido a safe ram clean..

CVslots · « **Reply #14 on:** March 19, 2015, 08:16:36 PM »

Door needs to be set for pulsed optics...

brooker · « **Reply #15 on:** March 19, 2015, 08:34:25 PM »

i put optical and the same... check the picture of the wire

CVslots · « **Reply #16 on:** March 19, 2015, 09:13:29 PM »

I need a pic of your set-up screen.

brooker · « **Reply #17 on:** March 19, 2015, 09:19:27 PM »

ram clear set up?

brooker · « **Reply #18 on:** March 19, 2015, 09:20:24 PM »

ram clear set up?

CVslots · « **Reply #19 on:** March 19, 2015, 10:19:00 PM »

Your settings need to be as followed...please adjust accordingly for your specific COIN equipment. (Acceptor, Hopper, etc)...

Jurisdiction - 5
Primary - SAS
Secondary - None
SAS version - 5.01
Cabinet - Upright
Coin Acceptor - None
Bill Validator - JCM WBA
Printer - Seiko
Hopper - None
Door - Pulsed Optic
Double Down - OFF
Tournament - OFF
EFT - Disabled
Secondary Dev - None
Residual Credit Mode - No Gamble No Attendant Pay
Win Evaluation Preference - Legacy

News:

NLG Site Navigation Menu

Author Topic: gamemaker error (Read 14720 times)