1
IGT S2000 and Vision Games / Re: TITO Help
« Last post by colby83 on Today at 01:47:01 PM »Change button doesn’t do anything. I’ll change it back to system and see what happens.
Welcome to the NewLifeGames.com message forum!
|
1
IGT S2000 and Vision Games / Re: TITO Help« Last post by colby83 on Today at 01:47:01 PM »Change button doesn’t do anything. I’ll change it back to system and see what happens.
2
IGT S2000 and Vision Games / Re: TITO Help« Last post by sixcardmark on Today at 01:44:15 PM »Does the service button work? Tickets printed BEFORE tito was installed will NEVER be accepted by any machine. Standard is NOT for tito, must be set to system.
3
IGT S2000 and Vision Games / Re: TITO Help« Last post by colby83 on Today at 01:41:10 PM »I changed 7.2.1.1 Validation type from System to Standard mode and the printer works but still no TITO.
4
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / sigma reel glass« Last post by Badbaud on Today at 01:34:50 PM »original is cracked
PM me please 5
IGT S2000 and Vision Games / Re: TITO Help« Last post by colby83 on Today at 01:28:23 PM »I checked the cable and ribbon cable and everything is good. I now have the light blinking fast which is telling me its communicating. I went through the set up again and it will not give me the option on 3.4.1.1.4 to disable anything. I can only choose between single and multi reporting. The printer is still saying " sorry, printer unavailable" and it still will not accept tickets that I printed before i got the TITO.
6
IGT I-Game and Game King / Re: igt gameking where is netplex on mother board« Last post by JG307 on Today at 12:49:55 PM »My backplane board does not have words on it either. 3902 13" GameKing cabinet. There is an 8-pin port labeled J12. Is this Netplex? I could not find my particular machine in the NLG File System (I am a contributing member.) Okay so I got to J2 and it's a 10-pin molex. The FutureLogic Gen2 printer I bought has a cable with an 8-pin molex connector. I was following this thread from the old site. Quote from: Nurbo https://newlifegames.net/nlg/index.php?topic=27951.0 Where you can clearly see the printer has an 8pin connection, and the distribution board is all 10pin. He mentions a female-to-female cable, but how does the number of pins change? 7
NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! / Re: Gameking Topper for AVP« Last post by Colion on Today at 12:41:54 PM » Thanks Jim! That's what I am looking for. I sent you a PM.
8
Bally Reel Games / Re: Bally Slot Machine Identity« Last post by Wingnut1419 on Today at 12:01:22 PM »Thanks slcjeeper,
Sorry new guy here, how would i test the power supply and where would i get pin headers and chip sockets and are the hard to replace? So i would just package up my board and send it off and they will let me know if it is good or not? Do you how much this would cost? Thanks again. Cheers 9
IGT S2000 and Vision Games / Re: TITO Help« Last post by rickhunter on Today at 11:47:43 AM »Check continuity on the cable, also make sure that the multi-colored ribbon cable is plugged in all the way on both ends, or better yet, reseat it on both ends to make sure you have good contacts.
10
IGT I-Game and Game King / Re: Main battery low/ options verification required« Last post by Ocitown on Today at 11:47:14 AM »Your correct,the see attendant is only on until I open the door.
|
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |