Thank you, for your reply.
I know that the wires are connected to the micro switch on the bottom of the cash can housing. My question was...where do they go from there? Those 2 wires are not connected at their source, where ever that might be.
I know that coin denomination has to be set on the dip switches, and then a full ram clear must be done. I already set the switches just as you said, and did the ram clear. but in the 11 test options....it shows that the machine is set for 0015 not 0014. The switches are set ON-OFF-OFF-OFF as I stated in my posting and I DID the full ram clear after setting the switches.
The bill transport unit is not energizing and therefore not making any attempt to take bills with the universal harness shown. I would imagine that the micro switch connections at the rear of the cash can housing not being attached at their source, might have some bearing on that also.