Author Topic: triple lucky 7's s2000 enhanced game problem coin in jam (Read 2976 times)

trashman · « **on:** August 08, 2018, 12:32:25 PM »

well thanks everyone so far.so i bought a new / used s2000 enhanced board for my game since mine was acid damage.installed it and now i get call attendant, closure m, coin in jam.i have opened and closed main door many times and cant get it to go away i try turning the reset key and got 1 accounting but never messed with the reset key again to try to fix this problem i hope someone can help.thanks p.s the emplacement board has the same numbers and is a enhanced board but it notice a number written in the rev box on the board but i dont know if that has any thing to do with any thing

qbert · « **Reply #1 on:** August 08, 2018, 01:09:16 PM »

Usually coin in jam is caused by a bad door I/O card.
With the machine off remove each door I/O card and check for bent or broken pins. Reseat each one and see if the problem goes away. You will probably have to lift the door handle a few times to see if it resets.

trashman · « **Reply #2 on:** August 08, 2018, 02:20:43 PM »

ii will look into that thanks

Retro tech repair · « **Reply #3 on:** August 13, 2018, 11:28:01 AM »

all senet io devices can cause this not just the io cards. also check your credit and line bet displays for any signs of damage. your machine may not have a line bet display

trashman · « **Reply #4 on:** August 17, 2018, 10:35:26 AM »

SORRY I WAS ON VACATION. Ok so i looked over i/o cards no bent pins or cold soldier joints.reset them and nothing changed.when i turn game on there was never any of the display lights ever lite in the winner paid , credits or credits played.

trashman · « **Reply #5 on:** August 21, 2018, 04:45:48 AM »

ok i ordered the board i keep everyone posted thanks

qbert · « **Reply #6 on:** August 21, 2018, 06:25:37 AM »

What board did you order? The MPU or the 6-6-3 display?

trashman · « **Reply #7 on:** August 21, 2018, 04:56:44 PM »

the door IGT I/O Board Set.

qbert · « **Reply #8 on:** August 21, 2018, 05:31:18 PM »

It may also be the 6-6-3 display.(red LED) it won't hurt to have spare I/Os if it's the 6-6-3.

trashman · « **Reply #9 on:** August 22, 2018, 01:46:16 AM »

ok if no help, i find one.but by chance do you have one should i need it thanks

trashman · « **Reply #10 on:** August 22, 2018, 05:28:56 PM »

ok i put both of the I/O boards in and now i get a 7 segment display mismatch,closure m, call attendant

.i will have to stay with my s plus machines. there so much easier to work on lol

RB · « **Reply #11 on:** August 22, 2018, 05:38:03 PM »

A quick key will fix that. Did you change from a 5-5-2 to a 6-6-3 or vice versa? It auto detects the display type after a clear but if you change it, you will have to manually change it in the key chip menu as that info is stored on the eeprom on the mother board.

qbert · « **Reply #12 on:** August 22, 2018, 07:01:52 PM »

You are correct for reliability nothing beats a S+.
But S2Ks have more whistles and buzzers.
Need to know what type of 5-5-2 or 6-6-3 display that you have. A picture of the front of the machine in the display area will help.
Rich

trashman · « **Reply #13 on:** August 23, 2018, 03:41:13 AM »

i didnt change display.i did replace the mpu board the lower or bottom board the is attached to panel.the upper board with the main chips is the original.here is a pic of the display i say its a 6-6-3.is there a set up say sheet to do change the key chip menu on the form or who do i do this thanks

qbert · « **Reply #14 on:** August 23, 2018, 04:27:19 AM »

That is a 6-6-3 for short glass.
Has it ever displayed anything at all on It?
Is this a one line 2 or 3 credit machine or is it multi line?
5 button deck?
What were the numbers of the I/O cards you replaced?
Did you ever get a clear/key chip set for it?
Picture of machine and I/O cards will help.

trashman · « **Reply #15 on:** August 23, 2018, 06:22:49 AM »

1 Has it ever displayed anything at all on It no not with the old I/O CARDS 2 It is a 3 credit machine 3 it is a 5 button deck 4 Did you ever get a clear/key chip set for it no .here is pictures of machine and I/O CARDS i pulled from machine. 5 here is the ebay link to the I/O cards they told me where the correct ones for my machine . https://www.ebay.com/itm/IGT-I-O-Board-Set-for-IGT-S2000-Slot-Machine/163162764446?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

qbert · « **Reply #16 on:** August 23, 2018, 07:10:44 AM »

OK I/O cards appear to be correct. You will need to get a set of Clear/key chips clear 224, key 45 are recommended for enhanced boards.
You also have coin handling that adds a little more complexity but should not be an issue.
I'm assuming the wheels never spin it just goes to the error.
Chances are the display is bad but a clear/key procedure may fix you.
Parts are still relatively cheap and you could probably get both display and chips while saving some shipping.
Use vendors here like RB or Ohiogaming that way your not paying EBay charges and you can contact them online in this forum.
Rich

trashman · « **Reply #17 on:** August 23, 2018, 04:33:49 PM »

the reels spins ok i look in to ordering them thank you !

trashman · « **Reply #18 on:** August 30, 2018, 03:22:18 PM »

ok i got the chips clear and key chip needed and did the presedure and now i get a call attendant , door open m,please select wamm or ipc anyone have any idea how to clear this or what to do next thanks

RB · « **Reply #19 on:** August 30, 2018, 05:52:55 PM »

You will have to key chip it again. Select WAMM in key chip config.

News:

NLG Site Navigation Menu

Author Topic: triple lucky 7's s2000 enhanced game problem coin in jam (Read 2976 times)