Mame+Player's Edge Roms

[Wzrd0803]

How do I get them to work in MAME?  I tried the Multigame XM00002p and XM0004p rom files.  The game loads but it gets stuck at Call Attendant so you can't play any poker games.  I tried pressing all the keys which are the "Inputs for this Machine" when you press Tab to see which keys are mapped to what but it doesn't get out of Call Attendant.  If you press the Open door button it gets a CMOS error on top of the Call Attendant.

[Badbaud]

Door open and CMOS error Call Attendant is normal.
You need to "press" the test button for a couple of seconds then close the door.
If you get another error open the door and turn the JP reset key and release.

[Wzrd0803]

Nevermind, I figured it out.  Found another post with instructions.

[Badbaud]

And, what was it?

[Wzrd0803]

And, what was it?

Player's Edge Plus games (peplus.cpp)

Two methods to startup, depending on set.

For: pebe0014, pebe0014a, pebe1001, peke1001, peke1006, peke1012, peke1012a, peke1012b, peke1013, peke1013a, pekoc766, pekoc801, pekoc802, pekoc803, pekoc804, pekoc806, pekoc818, pekoc819, pekoc825, pebe0014, pepp0065, pepp0188, pepp0250, pepp0516, peps0014, peps0022, peps0043, peps0045, peps0308

be sure the door is opened (if not, press O by default)

"CMOS DATA" will be displayed

press the self-test button (default is K)

be sure the door is opened (if not, press O by default)

"EEPROM DATA" will be displayed

press the self-test button (default is K)

be sure the door is closed (if not, press O by default)

For: pepp0043, pepp0158, pepp0447, peps0615, peps0716, pex2069p, pexmp006, pexmp017, pexmp024, pexp0019, pexp0112, pexs0006

be sure the door is opened (if not, press O by default)

"CMOS DATA" will be displayed

press the self-test button (default is K) until a "beep"is heard

be sure the door is closed (if not, press O by default)

press the jackpot reset button (default is L)

be sure the door is opened (if not, press O by default)

"EEPROM DATA" will be displayed

press the self-test button (default is K)

be sure the door is closed (if not, press O by default)