Multi denom setup

[Haywired]

Hello everyone,
Trying to set up multi denom with touch pad ...I get to 7.1.1.4 Denomination Touch-panel ....I have player Denom 1 Button 1 but when I go to player 2 ,3 and 4 it wont let me assign button numbers to them,just says No buttons assigned on 2,3 and 4  I have a 663 display ...any advise would be great
Thanks
Eric 

[cowboygames]

I believe you need to set the payback percent before you can assign a button. I assume you already set a value for the other options?

[Haywired]

No I did not .....7.1.2 Game selection correct?

[PLUNGER BOY]

are you using a multi denom VS chip

[Haywired]

 Yes ....VS GX1

[Haywired]

How do you change and save the settings in 7.1.2 ?

[cowboygames]

Scan to the setting you want and hit max bet. Each denom can be set for a different payback % and I think most casinos do this. Lower denom, better payback encourages higher denom play at a lower payback %, the bastards...

[Haywired]

7.1.1.3. Player Denomination...My insert is .05 .10 .25 .50 ..so I set it at Denom 1 .05.....Denom 2 .25......Denom 3 .10.....Denom 4 .50 ...Correct ?
Insert top 2 ...05 .25
Bottom 2 ...10 .50

[qbert]

That should be correct.
top left is denom 1
Top right  is denom 2
Bottom left is denom 3
Bottom right is denom 4

Positions are looking at the machine with the door closed.

[cowboygames]

I always put my demons lowest to highest 1-4 and button assignments are TL, TR, BL, BR

[Haywired]

Buttons 2,3, and 4 seems to be working except Button 1 .05 is not responding.

[Haywired]

I took the display back off ...adjusted the touch pad every thing seems to be working good ....first time installing multi denom....now I know what to look for ..........Thanks everyone for all your help ...much appreciated     

[cowboygames]

Glad you got it worked out