Author Topic: CPU-NXT2 boot up issue (Read 647 times)

br549autosales · « **on:** April 20, 2020, 01:03:25 PM »

Just installed a CPU NXT2 in one of my machines, used a clear card first and now after putting my OS card & game card in & powering up, I'm stuck at this screen.

rickhunter · « **Reply #1 on:** April 20, 2020, 01:08:00 PM »

Have you tried another OS card? I also suspect a hard drive issue, the machine is polling the hard drive bus and it is hung. Try replacing the hard drive to see if the problem goes away.

br549autosales · « **Reply #2 on:** April 20, 2020, 01:24:20 PM »

I have not tried another OS card yet. I just bought this NXT2 board & was told it worked 100%, could the hard drive wiggled loose perhaps during shipping? I don't have another hard drive to try

iramack · « **Reply #3 on:** April 21, 2020, 10:18:14 AM »

Did you run a clear on the old CPU before removing it. If it was a NXT1 cpu then that should be done.

Try it now. Put the old cpu back in and run the highest clear card you have for that platform. Then re-install then NXT2 and clear again.

SM

br549autosales · « **Reply #4 on:** April 21, 2020, 10:32:54 AM »

Thanks, I'll try that when I get home

iramack · « **Reply #5 on:** April 22, 2020, 10:43:00 AM »

Any Luck with the NXT2 ??

S

br549autosales · « **Reply #6 on:** April 22, 2020, 10:51:28 AM »

I'm going to try it again tonight & I'll post the results

News:

NLG Site Navigation Menu

Author Topic: CPU-NXT2 boot up issue (Read 647 times)

br549autosales

CPU-NXT2 boot up issue

rickhunter

Re: CPU-NXT2 boot up issue

br549autosales

Re: CPU-NXT2 boot up issue

iramack

Re: CPU-NXT2 boot up issue

br549autosales

Re: CPU-NXT2 boot up issue

iramack

Re: CPU-NXT2 boot up issue

br549autosales

Re: CPU-NXT2 boot up issue