Author Topic: Denver Duck...Com Link Failure (Read 14832 times)

jay · « **Reply #40 on:** July 03, 2020, 01:39:19 PM »

You can also get a PS2 adapter.
https://www.bing.com/shop?q=usb+to+ps2+adapter+amazon&FORM=SHOPPA&originIGUID=CE91B438246747C0BB74FCA8ABCC5FF8

Simply plug in your USB keyboard.

qbert · « **Reply #41 on:** July 03, 2020, 02:41:00 PM »

Haven't tried that not sure it works.
Worth trying.

jay · « **Reply #42 on:** July 03, 2020, 02:52:38 PM »

It works but there are different adapters between mouse and keyboard even though the pin out is the same.
Never understood that.

jake511511 · « **Reply #43 on:** July 03, 2020, 06:18:16 PM »

Ok hooked a keyboard up still getting the ...the could not start because of missing or corrupt file ......

qbert · « **Reply #44 on:** July 03, 2020, 08:52:55 PM »

From the back of the top box unplug the plug that has the six grey colored wires, then boot the machine and see if the message changes.
Is the harddrive listed on the initial boot screen?
That one picture you posted showed it recognizes the cdrom drive but the first thing it should have recognized was the harddrive. Your picture showed no harddrive.

jake511511 · « **Reply #45 on:** July 03, 2020, 10:13:05 PM »

Now it says on digital screen con in jam

jake511511 · « **Reply #46 on:** July 03, 2020, 10:14:13 PM »

on top screen still saying com link failure

qbert · « **Reply #47 on:** July 04, 2020, 04:21:26 AM »

Jake,
You have got to give me some more help. You can't just tell me the end result. Please try to explain what you did and what happened. Did the top screen go back to fully booting? Did the reels spin? Did it recognize the harddrive on the boot sequence? Without the little details of what it does while it boots makes trouble shooting your machine near impossible. We need detailed information not just the end result!
I have been asking for details from your first posts.
Your answer I've done everything??.

Do you have any spare parts like door IO cards, displays or anything else?

Not trying to yell at you but trying to fix your machine.
Coin in jam is a netplex issue. Yes it's going to say com link failure the grey plug I had you discount is the com link!

The laneman · « **Reply #48 on:** July 04, 2020, 05:34:53 AM »

Do a youtube video of the machine booting up and share the link on here.
That would really help Qbert out diagnosing the problem.

jake511511 · « **Reply #49 on:** July 04, 2020, 12:04:40 PM »

pic 1

jake511511 · « **Reply #50 on:** July 04, 2020, 12:06:26 PM »

pic 2

jake511511 · « **Reply #51 on:** July 04, 2020, 12:07:40 PM »

pic 3

jake511511 · « **Reply #52 on:** July 04, 2020, 12:08:25 PM »

pic 4

jake511511 · « **Reply #53 on:** July 04, 2020, 12:10:06 PM »

pic 5

jake511511 · « **Reply #54 on:** July 04, 2020, 12:11:06 PM »

pic 6

jake511511 · « **Reply #55 on:** July 04, 2020, 12:15:25 PM »

This is the sequence it boots up with the energy star on the monitor then it goes to blue screen reel touch....then to the gold touch finger testing executable images for valid CRC....then goes to initializing ....then wheels turn.....and coin-in jam on door display...com link failure on top screen

qbert · « **Reply #56 on:** July 04, 2020, 01:22:37 PM »

Ok good sequence of events.
Now what happens if you plug the top box grey plug back in?
Hard drive good. We can check your original again later.
Coin in jam could be anything on the netplex circuit.
These include both door I/O cards, printer, BV, VFD display and a few more.

Do any of the panel buttons light after it gets to coin in jam?

jake511511 · « **Reply #57 on:** July 04, 2020, 05:41:05 PM »

Ok machine was working....played for a little bit then went to cash it out and it says coin in the machine are jammed..........So it actually helped it out but its got the error

jake511511 · « **Reply #58 on:** July 04, 2020, 05:44:38 PM »

When I turn jackpot key it brings this screen up

The laneman · « **Reply #59 on:** July 04, 2020, 05:55:45 PM »

That machine dont have a coin mech and a hopper if Im not mistaken.
They are probably enabled in the setup.
I dont think the clear and key chips that you have for your rwb s2000 will work in the denver duck.I think you will need the newer clear 224 and key 45 for that machine.

News:

NLG Site Navigation Menu

Author Topic: Denver Duck...Com Link Failure (Read 14832 times)