Hello All,
Just retired and started tinkering back with my pins and slots, which have sat unused for quite a few years.
Anyway, I was able to get my v slant game maker 7000 up and running after a battery replacement and a clear.
I have notice that the physical button (Hold 3 - according to IO diagnostics ) does not work at all, but it works from the touch screen. IO diagnostics show that the hold 2 button is always on (engaged), but will momentarily turn off if i press it, does not seem to affect play, but does not seem right. I checked the harness, plugs and switches for continuity and all checked ok. Is there a switch matrix that controls the physical buttons? If so, where should I be looking, I don't have a schematic and need some help on where to troubleshoot next.
Thanks,
Scott