Making some progress on this machine. I get an error 23, Coin not sensed, and its persistent. After the clear, I set the machine up to be coinless, because there is no comparator or hopper just a wba bv.
On the main board I set the dipswitches to:
DS1 - all in off position
DS2:
1-4 off
5 on
6 off
7&8 on.
I havent messed with DS3 but here is what they are set at:
1 on
2 off
3,4,5 on
6,7,8 are off
The programming on the machine was set up using the Bally set up sheet for hopper less machines. The coin mech switch on the main mpu tray is up. The BV has no life to it meaning when I power up the machine the bv doesn't cycle. I can remove the bv transport and power the machine on and still get a code 23 and no other codes with door closed. I did a search and found a few examples of other people having this error but found no "cure".
Any ideas? Is there supposed to be a jumper plug in place of the comparator like with IGT machines?