WMS Clear Problems

[DJC]

Thanks to all who read this.  I will try to make this as short as possiblehope.  I hae a WMS Extra Extra Luck 3 reel  machine, with a small screen at the bottom right of the door.  I need help in identifying the boards and clear chips needed.  The machine was in good order then i did noty turn it on for some time.  Battery (2) died and were replaced.  Next i did not have a clear card, i did aquire one.  The machine does not go thru the clear process at this point.  any help is appreciated.  thanks Dave

[idesign]

What clear card are you using?  Typically, that last message on the screen implies you have a corrupt card.  Assume you pulled out the OS and game cards when you tried to clear and installed the clear card in the OS slot

[DJC]

The card made was an 1810.  I am not sure what card was needed.  I did not remove the game card when doing the clear.  The pic posted was where the clear stopped.  thanks for input.  Dave

[idesign]

You use the word MADE so it's a copy card.  1810 is on a 64mb WMS card.  The one you have is corrupt

[DJC]

ok. So from what i understand My extra extra luck 3 reel wms is a BB1 and Can use an 1810 Clear card.  The card is corrupted and i need another.  Ay clue as to where to get a good one ?  and thanks you so much for the help. 

[DJC]

By the way my board is blue

[rickhunter]

Board color does not matter.  You can post a WTB on the classifieds and somebody will probably chime in.

[DJC]

Thanks everyone   it was the clear card  amen