IGT PE+ DBV Top Mount Bill Validator Bezel with Light Board

[Ash100]

Found the parts needed to eliminate this Top Box Bill Validator.


I have what I believe to be an IGT PE+ that has a Bill Validator located in the Top of the Machine. I've never seen this configuration before, so I'm guessing there's not too many parts available to make this thing come back to life.

The Chrome Bezel is broken and the 2 Light Boards are destroyed. If available, I'd like to replace this piece (shown).

If not, my other route would be to delete it altogether.

Therefore, I would need the proper Backlight Box and a piece of PE Top Glass.

I prefer the Double Bonus Poker, but would entertain other pieces. Or a matching set of upper and lower for a Multi-game machine. I do have a Superboard for it that I have not tested yet.

Any help would be appreciated.

Curtis ash100

[slots4home]

Curtis
What are the dimensions of that top box.

[Ash100]

Here's the current configuration as it sits with the BV Box up top.

The Top Glass/Plexi is 15.25" by 6" and is secured by the current Light Box with the cutaway.

There's a Light Panel on ebay that looks like it would be correct for doing away with the BV Housing and would mount inside of the Cabinet instead of on the Door.
https://www.ebay.com/itm/295071699650?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=zPoLK7f2Rw-&sssrc=2349624&ssuid=Q5GJbnP0RLK&var=&widget_ver=artemis&media=COPY

I could purchase that and it would only leave me needing a piece of Glass and the Strips to hold it to the Door.

Hope this helps.

Curtis ash100