Alpha V32 - Help with Rigging Switch Wires

[skeletalpeacock]

Hi,

I kept getting open switch alerts on my Alpha V32 and found that a lot of wiring has been cut. What can I do here to make sure I can get the door alerts off and my CPU switch in order? Thanks!


Photo re-inserted using NLG file system. Please avoid using offsite image hosts. The photos always disappear over time making the thread useless in the future for anyone experiencing similar issues.
~moderator

[sixcardmark]

Those two switches in MPU box will show as open door L if not bypassed.  They run to same two pins on the MPU board, they probably have been bypassed, can't tell from the pic. Do you get open door L? If not your open door alert is coming from elsewhere.

[skeletalpeacock]

Those two switches in MPU box will show as open door L if not bypassed.  They run to same two pins on the MPU board, they probably have been bypassed, can't tell from the pic. Do you get open door L? If not your open door alert is coming from elsewhere.

Thanks for the reply! I do get open door L. And this is preventing me from seeing all of the options in the setup menu, so I'm stuck. I have attached a close up picture of the main CPU board and the menu. Can you tell me what needs a jumper or bridging?

[sixcardmark]

Logic door switch circled:

[skeletalpeacock]

Logic door switch circled:

Thanks. This removed the warning about door L.