Konami Dragon Fly - RS232 - Host Comm?

[systematic]

Does anybody know where is the location for the Rx-Tx-Ground on a Konami, for the host comm port? I don't see a DB9 or network cables... I also don't see a host comm connector anywhere. Any help? Thanks.

[systematic]

I should have said K2, Dragon Fly is the name of the game!

Does anybody know where is the location for the Rx-Tx-Ground on a Konami, for the host comm port? I don't see a DB9 or network cables... I also don't see a host comm connector anywhere. Any help? Thanks.

[iwalker]

Welcome to NLG

Looks like CN32,33,34.
See attached.

[systematic]

I think my slot machine doesn't have the comm board installed, can that be it? Because I dont see anywhere a connector as you mentioned. I see on the drawing that's something that may be installed, correct (optional)? When I get home tonight I'll take a picture of my Konami and upload it so you can help me easier. Sorry about my knowledge, it's very limited when it comes to slots!! Thank again.

[systematic]

Attached are some pics.

[systematic]

one more pic... connectors labeled CNB08, CNB20, CNB12, CNB15 is pretty much all I can see.

[iwalker]

Hi


Never worked on the older Konami's but Your Pics dont match up to the layouts I have for the backplane connectors - Are You sure this is a K2V. Are You from Australia by any chance - Their models are often different from what is found elsewhere. Hope someone with more experience on these can chime in.


Regards
Ian

[systematic]

Now you got me, I'm not even sure of the model (I hate not knowing things)! K2V is what I thought it was. I'm in the USA, so shouldn't be from Australia. If anybody can match the pics with a known model, please help. Thanks in advance.