Author Topic: s2000 hair puller (Read 10474 times)

cowboygames · « **Reply #20 on:** December 28, 2015, 05:55:11 PM »

Ok, was just curious if you'd changed the 3 together or not as a bad display would wreck the IO again at power up. Sorry, I forget, does the display work in another machine? Try starting machine with all other netplax devices unplugged like the printer, bv, etc...

Worst case scenario I guess is maybe change the wiring harness in the door and/or machine.

qbert · « **Reply #21 on:** December 28, 2015, 06:18:43 PM »

I know you said the MPU works in a different machine but have you tried a different MPU in the problem machine?

buybestslots · « **Reply #22 on:** December 28, 2015, 07:03:01 PM »

Quote from: cowboygames on December 28, 2015, 05:55:11 PM

Ok, was just curious if you'd changed the 3 together or not as a bad display would wreck the IO again at power up. Sorry, I forget, does the display work in another machine? Try starting machine with all other netplax devices unplugged like the printer, bv, etc...

Worst case scenario I guess is maybe change the wiring harness in the door and/or machine.

that's my next step I use a meter from power dist board to door everything checked good , going to do door wiring 1st thinking what ever took out I/o board might have did in a wire
thanks

buybestslots · « **Reply #23 on:** December 28, 2015, 07:05:19 PM »

Quote from: qbert on December 28, 2015, 06:18:43 PM

I know you said the MPU works in a different machine but have you tried a different MPU in the problem machine?

yes

cowboygames · « **Reply #24 on:** December 28, 2015, 09:11:18 PM »

I had a bad 9 line display once and cooked 3 IO boards before figuring out the display was shorted, learned my lesson the expensive way, lol

buybestslots · « **Reply #25 on:** December 29, 2015, 06:42:59 AM »

Quote from: cowboygames on December 28, 2015, 09:11:18 PM

I had a bad 9 line display once and cooked 3 IO boards before figuring out the display was shorted, learned my lesson the expensive way, lol

that was one of the 1st things I swapped out , we moved every display to another game and its works fine

cowboygames · « **Reply #26 on:** December 29, 2015, 08:03:03 AM »

Well, I'm perplexed, time to try the wiring harness or scrap the machine for parts before you go bald. There really isn't anything else it could be...

buybestslots · « **Reply #27 on:** December 29, 2015, 08:19:05 AM »

Quote from: cowboygames on December 29, 2015, 08:03:03 AM

Well, I'm perplexed, time to try the wiring harness or scrap the machine for parts before you go bald. There really isn't anything else it could be...
[/uote]
soon as I get my ass in high gear I'll swap wiring has to be something on door , I hope

buybestslots · « **Reply #28 on:** December 29, 2015, 03:52:37 PM »

changed all wire going to and on door and buttons and I/o board holders still the same I"m going to try another back plane on weds

RB · « **Reply #29 on:** December 29, 2015, 10:15:06 PM »

Before you pull that mother board, confirm that all the connectors are properly seated & in the right place. I once helped Jason figure out a voltage problem. One of his MB connections was unplugged. It is also possible to plug one in wrong as several connectors are the same size. You should be able to make comparisons with a working machine. Good luck.

buybestslots · « **Reply #30 on:** December 31, 2015, 01:32:51 PM »

was mother board one I changed must have been bad also
thanks for all the help
have a great new year

mvco · « **Reply #31 on:** December 31, 2015, 04:58:11 PM »

Congrats! :-) This one was a real bitch.

cowboygames · « **Reply #32 on:** December 31, 2015, 05:26:45 PM »

You can't say that in this part of the forum, you have to say "this one was a real mother-in- law"

qbert · « **Reply #33 on:** December 31, 2015, 05:36:18 PM »

I hate it when replacement parts are also bad they really throw you for a loop. Especially the mother board since they are a PIA to change.
Glad you got it working I thought it was destined for the scrap heap.

Rich

buybestslots · « **Reply #34 on:** December 31, 2015, 06:40:21 PM »

wife was more happy than me, machine was cleaned and was in mint shape , the mother board I put in was out of a cabinet the was damaged in shipping , main thing its working
happy new year

CVslots · « **Reply #35 on:** December 31, 2015, 11:36:56 PM »

Quote from: cowboygames on December 31, 2015, 05:26:45 PM

You can't say that in this part of the forum, you have to say "this one was a real mother-in- law"

Uh, yah....cause us "bitches" stick together! Oh yah, just remembered I'm the only one (bitch) on here!

:24

Nah, you guys feel free to speak as you wish! No one will get offended, and I won't tell anyone!

Roz

cowboygames · « **Reply #36 on:** January 01, 2016, 01:39:45 AM »

It's all good Roz, I know lot's of women who would happily agree with me in reference to their own mother-in-laws, my exwife included, lol

therockinelvis · « **Reply #37 on:** January 01, 2016, 06:27:32 AM »

I had a S+ with no display. Drove me crazy. After checking everything, I finally noticed the SP and SS chips were in the wrong locations. Both chips were shot, but I had some extra's. I wonder if a clear would have done anything for Steve? Like someone else said, the mother boards rarely go bad.

buybestslots · « **Reply #38 on:** January 01, 2016, 11:50:11 AM »

Quote from: therockinelvis on January 01, 2016, 06:27:32 AM

I had a S+ with no display. Drove me crazy. After checking everything, I finally noticed the SP and SS chips were in the wrong locations. Both chips were shot, but I had some extra's. I wonder if a clear would have done anything for Steve? Like someone else said, the mother boards rarely go bad.

the mpu was good it worked in another cabinet and I did clears a few times

News:

NLG Site Navigation Menu

Author Topic: s2000 hair puller (Read 10474 times)